• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • CAS No.: 9009-54-5
  • Other Names: Polyurethane foam
  • MF: C3H8N2O
  • EINECS No.: 210-898-8
  • Place of Origin: Hunan, China (Mainland)
  • Classification: Other Adhesives
  • Main Raw Material: Polyurethane
  • Usage: Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Other
  • Brand Name: MAGPOW
  • Model Number: MPD167(GUN)
  • Type: most popular car sealants windshield pu sealant
  • Spray type: Gun type&Tube type
  • Base: polyurethane
  • Color: champagne
  • Consistency: Stable Foam
  • Curing System: Moisture-cure
  • Tack-Free time: 7-15 mins
  • Adhesive Strength: more than 75 kPa
  • Stock: Full
  • Custom tailor: can accept customer's brand and design
  • Item: car sealants windshield pu sealant

Packaging & Delivery

Packaging Details common packing
Delivery Time 5-30days after get deposit

Most Popular Car Sealants Windshield Pu Body Sealant            


Item:MPD166 MPD167 MPD167(GUN)

This product combined the functions of heat insulation, cold insulation, moisture-proof, quakeproof, insulation, sealing, seal, heat preservation, cementation together,with the characteristics of high foaming quantity, the flexibility good, the cementation intensity high, characteristics and so on .It is the modern most ideal new building material, has the environmental protection energy conservation, construction convenience


Scope of application:
1.Installing,fixing and insulating of door and window frames;

2.Filling and sealing of gaps,joint,openings and cavities;

3.Connecting of insulation meterails and roof construction;

4.Bonding and mounting;

5.Insulating the electrical outlets and water pipes;

6.Heat preservation,cold and sound insulation;

7.Packaging purpose,wrap the precious&fragile commodity,shake-proof and anti-pressure.


Using Method:
1. 3-5 hour.
2. Before the use, sways the hoisting bucket fully (at least 20 times), guarantees in the pot the material to be even.
3.If uses the gun type froth sealing medicinal preparation, when use the hoisting bucket inversion and the spray gun screw joint, revolving opens the flow valve, after the adjustment current capacity carries on again spraying.
4. When spraying pays attention to the approaching speed, usually sprays the quantity to have to fill the volume one half then. Filled when the vertical slit when should from bottom to top, on the packing such as ceiling slit, as a result of the gravity function, the solidification froth possibly has not been able to fall, after suggested just filled carries on the suitable support, treated the froth solidification and evacuates the support again after the seam wall caking.
5. About 10 minutes, the froth skin drying, after 1 hour the froth solidifies approximately, and the froth achieves the best load-bearing effect stably in g.
6. Slices the extra amount froth with the knife, then in superficial water used soil mortar, coating or silica gel .Before the construction, should remove the greasy dirt and the floating dust from the surface, and sprays the few water in the construction surface, causes its moistly
7. the use finished, takes down the hoisting bucket, cleans cleanly with the special-purpose cleansing agent the spray gun


1. The hoisting bucket normal application temperature for 5~ 40, the best application temperature 18~ 25, the temperature can affect the foaming quantity, the temperature excessively is low when uses the foaming quantity to reduce also can have the few excesses. Therefore in the low temperature situation suggested this the constant temperature lays aside in 30~ 40 the environment 30 minutes to use again, or after is not higher than 40 the lukewarm water immersion hoisting bucket heating uses.

2. Suggested one time uses up, if causes not to be able to use up, may use: Keeps in the hoisting bucket the spray gun, the shutting down rate-of-flow controller (guards against air to enter, causes froth hardening and spray gun damage), the erect lays aside in ventilates coolly place; Or dismounts the hoisting bucket, is clean with the cleansing agent the spray gun and the valve clean, the erect lays aside is ventilating coolly place, but long-term storage.


Storage and packing:
1. 12 months in unopened packing store in temperature between +5 centigrade to +25 centigrade,keep in cool,shade and well ventilated area,Always keep the can with the valve pointed upwards.

2. Preserve and transport as non dangerous product.
3. Packing:500ml/can. 750ml/can,in iron barrel,12pcs/ctn,straw type and gun type.



For more information please refer to our Website:

We'll offer our sale agents and purchasers many kinds of services and benefits.

Most Popular Car Sealants Windshield Pu Body Sealant
1.most popular car sealants windshield pu sealant      2.car sealants windshield pu sealant        3.pu car body sealant

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $55,000
Learn More