Magpow Crystal Clear Rapid Heat Resistant Metal Ab Component Epoxy Resin Adhesive Glue
Scope of Application
The products of this series are widely used for bonding of metal and non-ferrous, connecting, sealing and repairing of hard materials, construction, auto spare parts, electronic components, also for usage in the material of pearls, jade, arts and crafts, antique etc.
Name Of Product
Component Rate (A:B)
Solidifying Speed (25℃mix glue 3-8g)
Shear Strength (25℃X48h,Steel- Steel)
5 Minutes Rapid Clear Epoxy Adhesive
Clear color or light yellow thick liquid for both Component A and B
1. Clean and dry the surface after getting rid of the oil, dirty, rust. 2. Adjust the glue according to the appropriate proportion. Smear the surface with glue based on the mixing of the two components evenly. 3. Bond them by pressure. It could achieve the using intensity after the solidifying for one hour under the normal temperature. 4. Solidifying in 24 hours, it would reach the max intensity.
1. It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess too much. 2. Tighten the caps after usage. Do not mix the cap of part A and B. 3. Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying. 4. Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation. 5. Take strict precautions against touching by the kids and entering into the mouth.
Storage & Packing
1. Store the products with air-tight seal in the environment of shade, dry and cool place. The shelf life is 12months from the date of production. It is available to reuse based on passing of the test if being beyond the shelf life. 2. Preserve and transport as non dangerous products. 3. Packing specification: 30g/set, 12sets/inner, 12inners/ctn in tube.MEAS: 43.5 * 32.5 * 44.5cm.
Our Company View
HUNAN MAGPOW ADHESIVE GROUP CO., LTD
Was founded in 1989, Leaders at all levels of care and guidance, in the community friends and the majority of customers with the help and support, has gone through more than 20 years of arduous pioneering and steady development process. Companies from the original workshop-style processing plant to national "Torch Plan" implementation of enterprises, national standards of enterprises, the state's key high-tech enterprises. Group assets worth 150 million.
As the country's largest private enterprise adhesive technology research institute. The Research Institute covers an area of 3600 square meters. A total of five layers, Divided into 28 advanced equipment, full-featured professional laboratory. The company invested more than 1100 million one-time, And The introduction of more than 20 sets of world-class test and testing equipment from Germany and Taiwan. The Research Institute has made a number of international advanced level of scientific research and national invention patents. At present, the company is actively reporting to create a national technology research institute-Global Adhesive Laboratory.
Reply within 24 Hours
Professional consultation service is available within 24 hours after receiving your feedback regarding the iterms that you bought. Global Insurance Service
Global insurance service
guarantees the safety of iterms when installation and application.
Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.
Contact us, you will get more than what you see!
HUNAN MAGPOW ADHESIVE GROUP CO., LTD
Address: Lansi Road, Changsha National Biomedical Base, Liuyang